Players of the Nintendo Switch Lite have recently been experiencing overheating issues, which has been causing frustration for many users.
Here is one of the users sharing Their experience on Reddit:
Don’t worry about It!
The CPU Guide brings you the best working solution to solve Nintendo Switch Lite Overheated.
6 Ways to stop Nintendo Switch Lite from Overheating
It is common for the console to warm up while it is on the dock, especially if you have been playing for hours.
How to stop the Nintendo Switch Lite from overheating?
To stop the Nintendo Switch Lite from overheating and won’t turn on apply the given steps below, but before you check out anything, ensure that the fan inside is working totally fine.
Tip 1: Restart Your Nintendo Switch Lite
The quickest fix one could think of is: restarting!
Some operations can get stuck and run in the background causing overheating issues. A restart can easily fix such issues.
If this doesn’t work for you, then follow the next solution.
Tip 2: Take a Break between game sessions
Is Nintendo switch hot in handheld mode?
It’s easy to end up with your consoles without a break which leads to Nintendo Switch Lite Overheating and Turning OFF By Itself.
This is very common for regular gamers. But this exercise is not necessary for the health of your console. Maybe this is the only culprit behind your Nintendo Switch Lite overheating problem.
Using the device for extended periods without regular breaks to allow it to cool down means insisting on working overtime. It damages the internal components considerably as well.
You should usually stop using the console when you get too hot while playing in handheld mode, as it can cause skin burns.
If you are still facing Nintendo Switch Lite in the dock then continue to the next tip.
Tip 3: Switch Getting Hot While Charging? Disconnect from power when NOT in use
A full charge takes about 3 hours, so there’s no need to plug it in or unnecessarily turn it on. Adjust the charging time and unplug it when not in use.
So, If the Switch is Getting Hot While Charging?
Then, we recommend using the Nintendo Switch Lite Dock charger with an LED indicator.
The built-in LED indicator indicates the charging status, so when the controller and console are properly mounted on the device and it’s charging when it’s fully charged and ready to use, you can see the red is charging. Green is fully charged.
If the LED indicator charging Dock couldn’t fix your Nintendo Switch Lite overheating while charging then try the next tip.
Tip 4: Place Nintendo Switch Lite in a Well-Ventilated place
There has been no wrong way to store electronics. During use, they all continuously release heat at the same time, so more than a regular air supply is required to maintain the normal operation. This is the same as for the Nintendo Switch Lite. It is in docking mode, especially when operating at maximum performance.
You could easily place a fan to continue blowing in that direction whenever it is in use as Nintendo suggests you should use the console in a place where the temperature is between 5 and 35°C (95 °F).
Or it can be easily installed on high platforms far away from other devices that are not affected by heat dissipation.
If these recommendations do not resolve the Nintendo Switch Lite hot in handled mode, we have one more way you can fix the overheating issue.
Tip 5: Clean Regularly
Dust usually builds up in the vents and for the best efficiency, they need to be kept clean.
Also, the metal Joy-Con rail could be the reason for the Nintendo Switch Lite overheating in handled mode. The rail may collect a lot of dust and debris over time. That’s why you should regularly clean your console’s slider rail.
And here’s a small video that will guide you on this.
You should not allow dust to build upon the vents. If there’s a lot of dust, and you can’t clean it yourself, you can take it to some expert. Otherwise, you can use a cleaning tool such as a vacuum cleaner to remove dust buildup.
You can check this Dust Blower out to keep the dust away.
If you are still having Nintendo Switch Lite hot in handled mode then this is the least you can do before taking your console to an expert or repair center.
Tip 6: Keep Your Nintendo Switch Lite Updated
It’s best you make sure that your Nintendo Switch Lite is up to date as sometimes your switch getting hot in handled mode could be due to some bugs so, new updates can help fix these bugs.
Here is how you can update Nintendo Switch :
- Open the Nintendo Switch Lite
- The HOME menu will open
- Click on the System Setting located in round icons in the Home menu
- A System Settings window will open
- Now scroll down on the left menu
- Select System
- Now Select System Update
- The Nintendo Switch Lite will start updating the software
While it is common for the switch to heat up during use, in some cases, it can overheat until it damages itself. You can avoid Nintendo Switch Lite overheating by placing the dock in a well-ventilated place, replacing the built-in fan, or aiming AC directly while playing.
If you want to know more about Nintendo Switch Lite simply hit the comment to let us know.