AYANEO 2 Overheating and Turning Off By Itself

Did you just experience AYANEO 2 Overheating? AYANEO 2 is too hot?

You may have noticed that after playing GTA 5 or when your console is downloading updates it feels much hot than usual.

Whatever the reason, we will identify it and fix your AYANEO 2 Overheating problem. You just simply need to follow the steps and read the instructions carefully.

Let’s look at some of the main reasons why does AYANEO 2 Overheats?

Why is AYANEO 2 Overheating?

If you are wondering why is my AYANEO 2 overheating, it is usually caused by the following 6 main reasons:

• Long gaming sessions on AYANEO 2
• Dust/Junk blocks the Deck’s ventilation
• Broken/damaged internal fan
• Poorly Ventilated area
• Game not power-optimized
• Internal problems of the AYANEO 2 circuit

Below are 5 common ways to stop AYANEO 2 from overheating.

Tip 1: Restart AYANEO 2

The first thing you need to do is Restart your console to overcome AYANEO 2 overheating.

Just follow these steps:

1. Press and hold the Power button for at least 8 seconds
2. Now press and hold the power button once to turn the console back on.

If you are still facing AYANEO 2 overheating then continue to the next solution.

Tip 2: Take a Break between game sessions

AYANEO 2 hot in handheld mode?

It’s easy to end up with your consoles without a break which leads to AYANEO 2 Overheating and Turning OFF By Itself.

This is very common for regular gamers or users faced when its downloading games or updating. But this exercise is not necessary for the health of your console. Maybe this is the only culprit behind your AYANEO 2 overheating problem.

Using the device for extended periods without regular breaks to allow it to cool down means insisting on working overtime. It damages the internal components considerably as well.

You should usually stop using the console when it gets too hot while playing in handheld mode, as it can cause skin burns.

If you are still facing AYANEO 2 Overheating then continue to the next tip.

Tip 3: Place AYANEO 2 in a Well-Ventilated place

There has been no wrong way to store electronics. During use, they all continuously release heat at the same time, so more than a regular air supply is required to maintain normal operation. This is the same as for the AYANEO 2.

You could easily place a fan to continue blowing in that direction whenever it is in use as you should use the console in a place where the temperature is between 5 and 35°C (95 °F).

If these recommendations do not resolve the AYANEO 2 overheating and turning off, we have one more way you can fix the overheating issue.

Tip 4: Clean Regularly to Fix AYANEO 2 Overheating

Dust usually builds up in the vents and for the best efficiency, they need to be kept clean.

You should not allow dust to build upon the vents. If there’s a lot of dust, and you can’t clean it yourself, you can take it to some expert. Otherwise, you can use a cleaning tool such as a vacuum cleaner to remove dust buildup.

You can check this Dust Blower out to keep the dust away.

If you are still having AYANEO 2 Overheating issues then this is the least you can do before taking your console to an expert or repair center.

Tip 5: Contact AYANEO Support

If you cannot get rid of the AYANEO 2 overheating after cleaning the vents, restarting, you should contact AYANEO 2 support or call at 400-039-8088 and ask them to perform the necessary repairs on the console.

We hope you get to fix the AYANEO 2 overheating.

And if you face any hurdles while trying the solutions then do let us know in the comments section below.

FAQs